aluminum sheet grinder machine

Description:

aluminum sheet grinder machine
1, deburring for sheet surfaces
2, light grinding or finish polishing sheet
3.No4 hairline fin

 

aluminum sheet grinder machine

Its main applications:

                  1, deburring for sheet surfaces

                  2, light grinding or finish polishing sheets or plate

                  3, surface oxide removal

 

This kind of machine always Work with Conveyor bed, precisely upor down on 4 pneumatic spindles, Dust extraction funnels.

Max. working width include: 600mm;800mm;1000mm;1300mm orothers

Working length: more than 400mm; working thickness: 0.5-30mm;feed speed: 5-30m/min

The processing of this machine is:

metal sheet--conveyor bed---grinding machine---conveyors---filmlaminating machine(laminate protective film on the metal sheet inorder to protective the sheet )--metal sheet.

This kind of machine include MSRR( two abrasive belt ), MSRRR(3abrasive belt ), MSRRB(2 abrasive belt and 1scrotch-brite rollers )three models. Depend on your sheet roughness and effect yourequired. you can choice different model.

Technical parameter

Machine model		MS16RR	MS16RRR	MS16RRB
Work piece	Thickness	0.5-30mm	0.5-30mm	0.5-30mm
	MaxLength	320mm	320mm	320mm
	Width	40-1600mm	40-1600mm	40-1600mm
Abrasive belt	Linear speed	about 14 m/s	about 14 m/s	about 14 m/s
	Size(WxP)	1630x1900mm	1630x1900mm	1630x1900mm
Conveyor belt	Feed speed	5-20m/min	5-20m/min	5-20m/min
	Size(WxP)	about 1600x3350mm	about 1600x4330mm	about 1600x4330mm
Motor (kw)	No.1 main motor	30.0kw	30.0kw for NO.4 2.5kw  for HL OPTIONAL	30.0kw
	NO.2 main motor	30.0kw		30.0kw
	NO.3 main motor			15.0kw
	Feed-in motor	4.0	4.0	4.0
	Lifting motor	0.37	0.37	0.37
Air	Consumption volume	about 0.66m3/min	about 0.76m3/min	about 0.76m3/min
	Working pressure	0.55MPa	0.55MPa	0.55MPa
Dust Exactor	Wind volume	6500 m3/h	8500 m3/h	8500 m3/h
	Pressure	about 2300Pa	about 2300Pa	about 2300Pa
	Wind speed	25-30m/s	25-30m/s	25-30m/s

aluminum sheet grinder machine